Id
The Id field shows the internal number under which the interface is stored. When creating a new interface, the field is empty. The type of the interface is displayed next to it. Both parts are for display and information only.
Name
The name of the interface. The name is displayed in selection lists and, where applicable, to users in notifications about the interface.
Comment
The comment field is available for free use by the integrator. It serves solely to document the configuration. You can enter information here, e.g. the purpose of the interface, any special features, etc.
Options
Here you will find a single checkbox: Disabled. If you select this checkbox, the interface is disabled as far as possible. Channels of the interface remain available in the system, but write accesses are no longer passed on to the hardware, and read accesses return no value or the last available value.
Disabling an interface can be useful if the hardware is no longer connected or is defective, or if you want to try something out without addressing physical devices.
IP/URL Solarlog
Here you enter the address of the Solarlog from which data is retrieved, e.g.:
You must adjust the IP address to match the Solarlog installation.
Update interval
Here you specify how often the data is retrieved.